Local. Family Owned. Trusted.

Which Gutter Guard Is Right for You?

Guards keep leaves and needles out, so you can stop climbing ladders to clean your gutters. Here’s how the three main types compare.

The Three Types of Gutter Guards

Valor gutter guard installed on a gutter
TypeStopsBest forSystems we install
Perforated metal guardLeavesHomes with mostly leafy treesAlu-Rex
Fine mesh guardLeaves, pine needles and seedsHomes near pine treesValor, Alu-Rex Double Pro
Reverse curve hoodLeaves slide right off while water flows inHeavy leaf fall areasGutter Topper
Pine needle areasValor

If you have lots of pine trees, a fine micro-mesh like Valor works best. Hood styles can let pine needles into the front slot.

Valor vs. Gutter Topper: tested specs

SpecValorGutter Topper
DesignRaised S-curve micro-mesh that lifts debris so wind can clear itSolid hood. Water follows the rounded nose into the gutter and debris slides off
Rainfall handledUp to 44 inches per hourUp to 22 inches per hour
Snow and ice load125 lbs per sq. ft.1,200 lbs per sq. ft.
Material316 marine-grade stainless steel mesh on an extruded aluminum frameHeavy-gauge 3105-H14 aluminum (0.024 inch) or 16 oz. copper, 13 colors
Debris it handlesFine debris, roof grit, pine needles and seed podsBroad leaves, twigs and heavy debris
Ice handlingMesh stays rigid under snow loadIce Release System designed to shed roof ice
Wind ratingLow-profile design limits uplift (no mph rating published)110 mph
Best forHeavy rain, steep roofs and valleysHeavy snow, sliding ice, large leaves and falling branches
Watch forIce can freeze over the mesh during long freeze-thaw stretchesPine needles and small debris can collect at the nose and may need an occasional rinse

Sources: Valor specs from the manufacturer. Gutter Topper specs from independent testing by PRI Construction Materials Technologies. Gutter Topper is made in Batavia, Ohio from 0.024 inch 3105-H14 aluminum.

Which gutter guard fits your home?

A ✓ means it’s a good fit. A dash means we don’t recommend it.

GuardBig debris (leaves)Small debris (pine needles, seeds)Metal roof / solar panelsAsphalt roof
Valor✓✓—✓
Alu-Rex Double Pro✓✓✓✓
Alu-Rex T-Rex✓——✓
Gutter Topper✓✓✓✓

Not sure? Your Service Advisor will recommend the right guard for your trees and roof at your free estimate.

Do you need gutter guards? A quick quiz to help you decide.

Common gutter guard myths, and what guards really do.

Living near pine trees? Here is what that means for your gutters and guards.

Alu-Rex continuous hangers

Alu-Rex gutter guard installed on a gutter

Alu-Rex systems pair a guard with a continuous hanger that supports the gutter along its full length, so it won’t sag, warp or pull away under snow and ice.

  • Double Pro: built-in microfiltration guard. Holds up to 425 lb per linear foot and drains up to 40″ of rain per hour. Fits 5″ and 6″ gutters. 360° Lifetime Warranty*.
  • T-Rex: holds up to 250 lb per linear foot and drains up to 30″ per hour. Best for light debris. Lifetime sturdiness and manufacturing warranty, plus a 25-year prorated clog-free warranty*.

*Manufacturer warranties as stated by Alu-Rex. All warranties are subject to Udderly Gutters approval.

Will guards work on my gutters?

  • Aluminum or other metal gutters (most homes): yes.
  • Copper gutters: yes, with guards made to match.
  • Plastic (PVC) or wood gutters: we don’t put guards on these. We can replace them with new seamless metal gutters and add guards at the same time.

How to choose

  • Lots of pine trees? Fine mesh (Valor or Alu-Rex Double Pro) or a reverse curve hood (Gutter Topper).
  • Mostly leaves? A perforated metal guard does the job.
  • Heavy snow and ice? An Alu-Rex continuous hanger keeps gutters from sagging.
  • Not sure? We’ll look at your trees, roof and gutters during your free estimate and recommend the right guard.

Do gutter guards mean no maintenance?

Guards cut cleaning way down, but no guard is maintenance-free. A quick yearly inspection keeps everything flowing. Ask about our gutter cleaning packages.

Learn More About Each Guard

What Homeowners Say

“Gutters were pitched properly and straight. Sagging was eliminated and screens were installed. Nice job guys.” — Norman P.

Gutter Guard FAQ

When guards aren’t the right call

Guards aren’t right for every home. Scheduled cleanings may be the better fit if:

  • You have few trees near the roof. Light debris means a cleaning or two a year often keeps gutters flowing.
  • Your gutters need repair or replacement first. Guards on sagging, leaking or undersized gutters won’t fix the real problem. See Repair or Replace?
  • A cleaning membership fits your budget better. Memberships start at $400 a year and include 10% off winter services. See Membership vs. One-Time

Not sure? We’ll tell you honestly at your free estimate, even if the answer is that you don’t need guards.

Which gutter guard works with a metal roof or solar panels?

Alu-Rex Double Pro and Gutter Topper.

What is the best gutter guard for pine needles?

Fine mesh guards stop even small pine needles and seeds. Reverse curve hoods also work well in pine areas.

What’s the difference between mesh and perforated guards?

Perforated metal stops leaves. Fine mesh also stops pine needles and seeds.

How does a reverse curve hood work?

It covers the gutter so water follows the curve in and leaves slide right off.

Can you put guards on plastic or wood gutters?

No. We don’t install guards on plastic or wood gutters. We can replace plastic or wood gutters with seamless metal gutters and guards.

Do gutter guards help in winter?

An Alu-Rex continuous hanger helps gutters hold up under snow and ice, and guards keep gutters clear so meltwater can drain.

Do you install gutter guards in my area?

We serve homes within 90 minutes of our Jaffrey, Salem and Grantham, NH offices across New Hampshire, northern Massachusetts and Vermont.

Scroll to Top